<
>

    AUDIOAMP

    POWER UP.

    The AUDIOAMP is an efficient amplifier with 2 x 50 watts power output primarily meant to be used with the
    AUDIOMODULE Line. As a top hat rail device, installed in the distribution board, it is protected against theft and manipulations.

    An efficient and powerful integrated Class-D amplifier and an integrated DSP chip ensure outstanding audio quality.

    A number of different DSP profiles are available for optimal adaptation to the room and operation purpose. These can be easily loaded and activated via an adapter.

    With a 3.5mm Stereo jack (Line IN), the AUDIOAMP offers an uncomplicated,   versatile and easy-to-use input. For the AUDIOMODULE   LINE but also for almost any other audio source with a line output.

    A further 3.5mm Stereo jack socket (Line OUT) can be used to link the audio signal for further AUDIOAMP.

    The output power is pre-set and stored via buttons on the front of the AUDIOAMP. Via a push button interface (potential-free contact input), the volume can be changed and muted with a simple button.

    PRODUKTANWENDUNG - DER AUDIOAMP IM EINSATZ+

    AUDIOMODULE and AUDIOMODULE LINE

    THE AUDIOAMP IN USE

    Technical Data - AUDIOAMP+

    Technical Data

    • Power supply: 24 V DC / 5 A 
    • Power input: 120 W 
    • Connection: pluggable screw terminal 
    • Environmental conditions: EN 50090-2-2 
    • Ambient temperature: 0 to +35 °C 
    • Relative humidity (non-condensing): 5 % to 80 %

    Mechanical Data

    • Installation: MDRC 4 MW
    • Dimensions (W x H x D) in mm: 72 x 90 x 63
    • Housing: plastic
    • Protection class: IP20 (according to EN 60529)
    • Weight: 170g

    Interfaces

    • DSP Interface: upload DSP profile
    • Audio Line In: 1 Veff @ 10 kΩ via 3.5 mm Stereo mini jack   
    • Audio Line Out: 1 Veff @ 10 kΩ via 3.5 mm Stereo mini jack  
    • Speaker connection: 2 x 50 W RMS @ 4 Ω screw type terminal up to 3,6 mm2
    • Volume control: Potential free contact input for volume up/down and mute

    Features

    • Mounting DIN rail
    • 2 x 50 Watt output power
    • Potential free contact input to control the volume and mute function
    • DSP profiles exchangeable
    • Integrated Digital Sound Processor (28/56 Bit DSP)
    • 192 kHz sample rate
    • 24 Bit AD / DA convertor
    • Class-D amplifier
    • Input - limiter
    • Protection against short-circuit and over-temperature
    • Overload protection
    • Status LEDs
    • Adjustable volume via buttons on the front
    • Auto Standby

    Software requirements

    • none

     

    Art.-Nr.+

    10540 - AUDIOAMP Ausschreibungstext DE (txt doc rtf)

    Accesssory+

    Art.-Nr. 35422 POWER SUPPLY PSM6/120.24 

    Art.-Nr. 10549 ADAPTER DSP programming interface (at the moment unavailable).

    Download+

    Documentation

    • AUDIOAMP Kurzanleitung DE 
    • AUDIOAMP quick reference guide EN 

    Infomaterial

    • AUDIOAMP DE 
    • AUDIOAMP EN